Antistatisch reinigingsdoekje
1319Antistatisch reinigingsdoekje,
Details bekijkenProduct zoekenZoek bericht
Meditech’s Cleanroom Swabs are very good substitute for Texwipe Swabs. They are constructed from compressed, 100 ppi (Z) open-cell polyurethane foam or Polyester or Microfiber that is free from organic contaminants such as silicone, amides or DOP. The foam is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or coatings. Laundered and packed under an ISO Class 4 Cleanroom, the foam exhibits low particulate and ionic content. It has excellent compatibility with most common solvents including acetone as well as excellent absorbency and solvent-holding capacity.
The foam head is compressed and possesses good firmness. The pointed, non-abrasive foam head is designed for cleaning small, slotted areas. The fiber head is designed for cleaning small, slotted and recessed areas. The excellent cleaning is controlled and supported flexible Paddle.
The swab handle is ESD-safe and is made from polypropylene. The handle is compact and will not contribute to particulate or organic contamination. Designed for general purpose cleaning, Cleanmo Anti-static Cleanroom Swabs are the ideal swabs to use in cleaning static sensitive components or parts.
Leren hoe u uw Evolis-kaartprinter moet reinigen is erg belangrijk. Het wordt aanbevolen om uw kaartprinter te reinigen wanneer u uw linten vervangt.Stappen voor het reinigen van Evolis-kaartprinter:1. Eerst moet u Meditech reinigingskits klaarmaken die compatibel...
Details bekijkenTegenwoordig is ESD een ernstig probleem in verschillende industrieën. Antistatische materialen hebben een statische dissipatieve functie wanneer ze geaard worden of geconfronteerd worden met een vlakke geleider die gelijk is aan de aarde. Statische dissipatieve materialen hebben...
Details bekijkenSpecificaties zwabber schoonmaak zwabber ESD stick zwabbers 1.Disposable 2.cleaning 3.foam tip zwabberSwab is een verbruiksgoederen en wegwerpproducten voor industri...
Details bekijkenVoer het rekenkundige resultaat in.
Onjuiste berekening, voer opnieuw in.