Search productSearch post
Open the printer cover.
Remove the ribbon from the printer.
Close the cover and check it has clicked shut.
Open the card feeder and remove the cards.
Take a new T-shaped cleaning card supplied by Evolis and open the sachet.
Press the pushbutton on the printer control panel twice.
When the “card/ribbon” LED on the control panel flashes, insert the “T” card into the feeder.
Cleaning starts.
Remove the “T” card.
Place the cards back into the feeder, then replace the ribbon.
In order to ensure good print quality printer about every print 1000 In order to ensure good print quality printer, approximately every 1000 cards printed card is necessary to use a clean clean. (Note: the card into the card slot into the bottom o...
View detailsIn order to ensure the quality of the dust-free foam swab, in addition to the quality of raw materials to produce foam swabs is better, but also to see the dust-free foam production workshop environment. Because only the dust-free production envi...
View detailsUsually, we use a brush to clean the IC with cleaning solutions, this is definitely a good method for the IC cleaning as a special washer water or thinner is not conductive. It is very important, as thus will not damage the electronic components....
View detailsEnter the arithmetic result.
Incorrect calculation, please re-enter.
Meditech
