Various of terylene esd swab used in clean room for promotion
22Features1. Scrubbing recessed areas2.Removal of excess materials, debris3.Cleaning intersecting surfaces and joints4.Cleaning with compatible solutions and solvent...
View detailsSearch productSearch post
First use of blowing off the dust ball lens, very fine dust, due to the surface by the molecular surface of the lens can attract, was adsorbed by the state, is not easy to blow off, use a soft brush gently brush (brush usually should be stored in a tight box, oil, pay attention to not contact finger brush head, use should use the lens of water to brush scrub, reoccupy cloth wipe).
Secondly, if the lens is coated with oil or fingerprint, blowing, brush is invalid, then we must use clean soft cotton is the sign of the son (or wipe mirrorpaper) coated with a little water and gently wipe the lens, not with ethanol (alcohol), carbon tetrachloride, or other cleaning liquid. Don’t just wipe the dirty clean the lens, the mirror must be gently along the radially outward from the center line to wipe, and continue to replace with clean cotton swab. Don’t do circular motion, and clean the disc like this.
Finally, in the lens of water wet, and then clean cotton swab to gently wipe the lens surface of an article. Touch lens is strictly prohibited in the cleaning process, cleaning to immediately cover the lens cover.
Features1. Scrubbing recessed areas2.Removal of excess materials, debris3.Cleaning intersecting surfaces and joints4.Cleaning with compatible solutions and solvent...
View details1. With the deposit application or ScanLite launched, hold down the shift key and press the ‘Reset’ button (or unplug and plug back in the power supply). This will start the scanner’s cleaning / diagnostic mode program.2. Select the ‘Clean’ tab a...
View detailsCleanroom Swab is constructed from double-layer polyester cloth that is free from organic contaminants such as silicone, amides or phthalate esters.The cloth is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive o...
View detailsCleaning swabs, also call it the clean swabs, swabs, purified cleanroom swab, anti-static clean swabs, sponge/foam head cleaning swab, etc., which are often used industrial cleaning consumables. They are mainly used for: 1. The chip, microprocesso...
View detailsEnter the arithmetic result.
Incorrect calculation, please re-enter.