How to clean Zebra ZXP Series 3 card printer?

When the printer LCD display “clean printer” or the print quality is bad, it’s time to clean your ZXP 3 card printer. Then you need ZXP 1 & ZXP 3 series printer cleaning kits which includes: 4 print engine cleaning cards and 4 feeder cleaning cards.

1.With the printer power on and the LCD display showing ready hold down the control button for five seconds, then follow the LCD instructions.

2.Open the printer lid, remove the ribbon and closed the lid.

3.Now the LCD will display “empty feeder then close cover”. Open the card feeder cover, remove the cards and close the cover.

4.Insert the long cleaning card into the manual card feeds slot. Wait for the cleaning process to complete.

5.When the cleaning process is completed, the cleaning card will be ejected.

6.Open the card feeder cover and insert the feeder cleaning card into the card feeds slot. Close the card feeder cover. Wait for the cleaning process to complete.

7.When the cleaning process is completed, the LCD will display “remove feeder cleaning card”, open the card feeder cover and remove the cleaning card.

8.The cleaning process has been completed. The LCD will display “cleaning done”.

9.Load the cards and close the card feeder cover. Open the printer lid, install the ribbon, and close the lid.

http://www.meditech.cc