Search productSearch post
1. Remove all money from the bill acceptor.
2. Take your dollar bill acceptor cleaning card from the packaging.
3. Insert the cleaning card into the dollar bill acceptor just like a bill.
4. Then it ejects its solutions to the belt and the optical sensor to clean them.
5. You can pull back on it and apply pressure when it is coming out.
6. Repeat above steps a few times.
Clean your bill acceptor regularly can remove all the dirt and debris build up on the belts, it can save you bill jams and faulty read on bills.
Clean Swab is constructed from double-layer polyester cloth that is free from organic contaminants such as silicone, amides or phthalate esters.The cloth is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or co...
View detailsIn a lot of Stars Hotel or some high-grade hotel, we will see these places must swipe your card to enter the room. However, when the hotel card lock is used for a period of time, you will find the real lock sensitivity is greatly reduced, or the h...
View detailsThe use of foam swabs in the automotive industry Car is a common means of transport in life, so the maintenance of the car is also very importantOur products are also suitable for the maintenance and repair of automobiles. Then where can our cle...
View detailsSpecifications1.Blending polyester,cellulose and PVC card 2.For cleaning swab contaminants from Zebra printers 3.P330i/P120i/P100i clean DecriptionThe IPS Snap&nb...
View detailsEnter the arithmetic result.
Incorrect calculation, please re-enter.
Meditech
