Search productSearch post
1. Remove all money from the bill acceptor.
2. Take your dollar bill acceptor cleaning card from the packaging.
3. Insert the cleaning card into the dollar bill acceptor just like a bill.
4. Then it ejects its solutions to the belt and the optical sensor to clean them.
5. You can pull back on it and apply pressure when it is coming out.
6. Repeat above steps a few times.
Clean your bill acceptor regularly can remove all the dirt and debris build up on the belts, it can save you bill jams and faulty read on bills.
1. With the deposit application or ScanLite launched, hold down the shift key and press the ‘Reset’ button (or unplug and plug back in the power supply). This will start the scanner’s cleaning / diagnostic mode program.2. Select the ‘Clean’ tab a...
View details
MediTech Main Swab Products Brief Introduction.Meditech cleanroom swabs include three main classes: cleanroom foam swabs, cleanroom polyester swabs, cleanroom microfiber swabs. And all swabs can be made of antistatic. If you have special design ...
View detailsBuy printer a long time, there will inevitably be some failures, such as printed bar codes, two-dimensional codes will appear unclear circumstances, or the printer does not work properly. Some people might think that some hardware printer problems...
View detailsA cleanroom swab is a specialized tool designed for use in cleanroom environments to effectively clean and remove contaminants from critical surfaces. Cleanrooms are controlled environments with low levels of airborne particles, which are essentia...
View detailsEnter the arithmetic result.
Incorrect calculation, please re-enter.
Meditech
