Search productSearch post

Digital Check TS240 Cleaning Procedure

News 8

1. With the deposit application or ScanLite launched, hold down the shift key and press the ‘Reset’ button (or unplug and plug back in the power supply). This will start the scanner’s cleaning / diagnostic mode program.
2. Select the ‘Clean’ tab at the top to start the scanner’s motor. This will cause the rollers to spin, making it easy to feed the cleaning cards through the scanner.
3. Remove the cleaning cardfrom the pouch. The card will be the most effective for the first 60 seconds or so.
4. Insert the cleaning cardinto the scanner. Hold onto the card. Keep holding onto the card so that it does not feed into the scanner.
5. The first feed roller will scrub itself against the card. Flip and rotate the card to a clean corner after a few seconds of scrubbing. Repeat this step 3 to 4 times.
6. After the first roller has been cleaned, insert the card into the scanner. Scan the card as if it were a normal document 3 to 4 times.
7. Once the scanner has been cleaned, press the ‘Clear’ tab to stop the scanner’s motor.
8. Disconnect the power and USB cables. Remove the various outer covers. The covers are removed by lifting up on them vertically.
9. Locate the white nylon thumbscrew. Remove the thumbscrew and carefully open the outer camera door.
10. Clean the glass lens covering the cameras. Dampen a tissue or paper towel with water or glass cleaner.
11. Close the camera door and replace the white nylon thumbscrew. Replace the scanner covers.
12. Items that have stopped in the path can be removed by carefully lifting up on the item and pulling or rocking it loose.

The prev: The next:

Related recommendations

  • Swabs and Cosmetic

    8

    Swabs dipped in eye shadow to color your hairIf you do not have time to find a hair stylist to color your hair, do not worry. You can use a moist swab to stain with some eye shadow whose color is similar to your hair color. Paint the color in the...

    View details
  • How to clean card reader

    7

    The cleaning and maintenance of a credit card reader is recommended by the equipment manufacturer to keep the reader in good working order and to prolong the life of the device if done properly and regularly. Your credit card readers come in all s...

    View details
  • Printer Head Cleaning Foam Swabs

    2

    Product Description We a logistics and Manufacturing center was established in Shenzhen, Mainland China for an optimum effect and flexibility. The customers are well diversified in the Hard Disk Drive, Semiconductor, Medical, Pharmaceutical and Au...

    View details
Expand more!

Enter the arithmetic result.

Incorrect calculation, please re-enter.