Search productSearch post
This is a cleaning instruction for a common cash count.
1.Turn off the cash count.
2.Remove the hopper and the feeder.
3.Use a brush to remove the dust on the roles and sensors.
4.Remove the remaining dust with dust spray remover.
5.Close the feeder plate.
6.Clean all exterior surfaces with dry lint free cloth.
7.Turn on the currency counter.
8.Place the cleaning card into the machine’s feeder.
9.Allow the cleaning card to feed in the machine. Repeat the procedure a few times.
10.Replace the hopper.
If you wish to accept the best blazon of cleaning swabs for electronics, you charge to accede the account you are aggravating to clean.Cleaning Swabs are generally a acceptable best for cleaning electronics, but affection assurance will about leav...
View detailsThe foam wab is designed for cleaning small, slotted , recessed , broad and flat areas.Its laundered,knitted polyester head is extremally clea...
View detailsFlexible Head Swab Industrial general-purpose swab for cleaning surfaces and wider recessed areas. These Foam Cleaning Swabs are excellent for solvent inks as well as aqueous dye inks . The Foam head with flexible spade tipped head . Cleaning swab...
View detailsProduct details:Swab head: High density & open cell foam materialSwab bond: Thermally bondedHandle: Safe Polypropylene handleVarious size are availab...
View detailsEnter the arithmetic result.
Incorrect calculation, please re-enter.
Meditech
