Disposable Anti-static FS757 cleanroom clean Swab
65-Free from silicone, amide and DOP-Low non-volatile residue-Low in both particles and ion content-Excellent solvent-holding capacity-Compatible with most ...
Details bekijkenProduct zoekenZoek bericht
First use of blowing off the dust ball lens, very fine dust, due to the surface by the molecular surface of the lens can attract, was adsorbed by the state, is not easy to blow off, use a soft brush gently brush (brush usually should be stored in a tight box, oil, pay attention to not contact finger brush head, use should use the lens of water to brush scrub, reoccupy cloth wipe).
Secondly, if the lens is coated with oil or fingerprint, blowing, brush is invalid, then we must use clean soft cotton is the sign of the son (or wipe mirrorpaper) coated with a little water and gently wipe the lens, not with ethanol (alcohol), carbon tetrachloride, or other cleaning liquid. Don’t just wipe the dirty clean the lens, the mirror must be gently along the radially outward from the center line to wipe, and continue to replace with clean cotton swab. Don’t do circular motion, and clean the disc like this.
Finally, in the lens of water wet, and then clean cotton swab to gently wipe the lens surface of an article. Touch lens is strictly prohibited in the cleaning process, cleaning to immediately cover the lens cover.
-Free from silicone, amide and DOP-Low non-volatile residue-Low in both particles and ion content-Excellent solvent-holding capacity-Compatible with most ...
Details bekijkenThe swab we produced has around 30 types specially for the industry of medical, daily health care, optical and electonics cleaning use.The head of tip use different material including 100% of sterile cotton which imported from Japan, sponge, non-...
Details bekijkenSwab Description :This Large Rectangular Foam Head Cleanroom Swab is a large, general-purpose swab for cleaning surfaces. Its closed-cell polyurethane foam head possesses excellent durability and cushioning. A rigid internal paddle provides firm ...
Details bekijkenWhy wait for a new card equipment to be delivered or installed? The transaction equipment can often be back in service in seconds with a cleaning card. Most equipment failures are caused by dirt and only needs to be removed to be fully functional...
Details bekijkenVoer het rekenkundige resultaat in.
Onjuiste berekening, voer opnieuw in.