IPA Snap Swab
651. For cleaning contaminants from printers 2. 2-3ml 99.9% IPA solution3. Aluminium Foil Packing DecriptionMedietch IPA Snap Swabs are specially&nbs...
Details bekijkenProduct zoekenZoek bericht
1. Fag head;
According to the materials and the use of different functions, the fag head can be divided into the following cloth:
A. knitted nylon(super wear-resistant)
B. knitted microfiber(clean the fine dust and gentle wear)
C. weaving microfiber(professional for optical fiber)
D. Weaving Dacron (The cloth is longitudinally striated and the aperture is deeper, which can accommodate more dirt.)
2. Spongy top;
According to the density of sponge and flaky condition, it can be divided into the following two types:
A1. The opening PU sponge, which is 100 PPI (PPI – PORE PER INCH, refers to the number of holes PER INCH; the more the number it has,the more exquisite the sponge has, which is less likely to drop crumbs). The sponge density is low and chip off easily, but the speed of water absorption is fast, which is suitable for medical use;
B1. Opening PU sponge, 400-500 PPI, the sponge density is higher than 100 PPI; is less likely to drop crumbs and has high grade, which is suitable for use in electron.
3. Non-woven wipe;
Low grade, the processing difficulty is relatively small, and the price is cheap.
4. PVA head.
With super-strong capacity of water absorbing and high cleanliness, but the price is high.
Above are different characteristics of the cleanroom swabs.
If there are any questions, please do not hesitate to contact us by searching our website www.meditech.cc or through our telephone number 0755-28690225.
1. For cleaning contaminants from printers 2. 2-3ml 99.9% IPA solution3. Aluminium Foil Packing DecriptionMedietch IPA Snap Swabs are specially&nbs...
Details bekijken25 or 50 Cleaning Cards Per Box54 X 85 X 0.711 mmPart Number : TPCC-CR80 Card Readers require preventative maintenance for keeping the...
Details bekijkenThis microfiber clean tip Swab is an excellent swab for cleaning very small grooved, slotted and recessed areas. Its hydroentangled continuous-fila...
Details bekijkenFeatures1. Scrubbing recessed areas2.Removal of excess materials, debris3.Cleaning intersecting surfaces and joints4.Cleaning with compatible solutions and solvent...
Details bekijkenVoer het rekenkundige resultaat in.
Onjuiste berekening, voer opnieuw in.