Meditech
Printer Cleaning Swabs Printhead Clean Swab
2DescriptionThe printhead clean swab is designed for cleaning small, slotted , recessed , broad and flat areas.Its laundered,knitted polyester head&nbs...
View detailsHow does the printer cleaning pen use it?
News 5
How does the printer cleaning pen use it?
The printer used for a long time, because the head of the print head toner residue
caused by the printing effect is not very good, a direct impact on the use of thermal printers
So we often use the printer cleaning pen to clean the head of the printer
1, disconnect the power to ensure safety.
2, open the printer, find the location of the print head.
3, remove the printer cleaning pen, forced to rotate the cap or directly pull out.
4, so that the pen tip and the print head smooth contact, in the print head back and forth to erase. (Clean pen head is IPA solution, with good volatility, do not worry about the liquid residue in the print head)
5, turn on the power, test how the cleaning effect, if not clear, repeat the above steps, clean again.
Related recommendations
Cleaning Swab for Printer Head
2Product DescriptionFoam Swab: Foam-made from CleanFoam, solvent cleaned 100 ppi open-cell polyurethane foamStick- polypropylene handleThe Large Rectangular He...
View detailsShopping Tips of Cleaning Swabs
8Cleaning swabs, also call it the clean swabs, swabs, purified cleanroom swab, anti-static clean swabs, sponge/foam head cleaning swab, etc., which are often used industrial cleaning consumables. They are mainly used for: 1. The chip, microprocesso...
View detailsIntegrated Circuit and Cleanroom Swab
10Usually, we use a brush to clean the IC with cleaning solutions, this is definitely a good method for the IC cleaning as a special washer water or thinner is not conductive. It is very important, as thus will not damage the electronic components....
View details