Anti-static cleaning swab
17Anti-static cleaning swab,
View detailsSearch productSearch post
The printer is used a long time, the most likely place of dirty is printer head, if the print head can not be kept clean, it will either affect the print quality, or it will cause damage to the printer. So, how we should clean the print head it? In order to ensure good print quality printer, approximately every 1000 prints, cards will be carried out once clean.
1. Disconnect the printer.
2. Open the printer’s front cover.
3. Remove the ribbon and transfer film frame.
4.The print head cleaning rod extrusion, the cleaning rod front end cotton yarn full of alcohol.
5. Gently wipe the print head back and forth (3-4) with a cleanroom swab, printed with dark brown stripes print head. (Note: Do not wipe the print head with a sharp object, can not be forced to clean the print head over)
6. Wait for the printhead to dry completely after the ribbon and transfer film frame homing, close the front cover.
7. Reconnect the printer power.
In this way, you can clean your own printer, and did not need to bother maintenance personnel on-site service, and also be able to save you a lot of time too!
Buy printer a long time, there will inevitably be some failures, such as printed bar codes, two-dimensional codes will appear unclear circumstances, or the printer does not work properly. Some people might think that some hardware printer problems...
View detailsThe use of foam swabs in the automotive industry Car is a common means of transport in life, so the maintenance of the car is also very importantOur products are also suitable for the maintenance and repair of automobiles. Then where can our cle...
View detailsATM swipe dip card readers cleaning cardCR80 ATM Cleaning cards are designed to remove dirt, dust, oils and other contaminates from equipment. The cleaning card is also an extremely fast, economical and simple means of cleaning equipment. The man...
View detailsEnter the arithmetic result.
Incorrect calculation, please re-enter.