Search productSearch post
The printer is used a long time, the most likely place of dirty is printer head, if the print head can not be kept clean, it will either affect the print quality, or it will cause damage to the printer. So, how we should clean the print head it? In order to ensure good print quality printer, approximately every 1000 prints, cards will be carried out once clean.
1. Disconnect the printer.
2. Open the printer’s front cover.
3. Remove the ribbon and transfer film frame.
4.The print head cleaning rod extrusion, the cleaning rod front end cotton yarn full of alcohol.
5. Gently wipe the print head back and forth (3-4) with a cleanroom swab, printed with dark brown stripes print head. (Note: Do not wipe the print head with a sharp object, can not be forced to clean the print head over)
6. Wait for the printhead to dry completely after the ribbon and transfer film frame homing, close the front cover.
7. Reconnect the printer power.
In this way, you can clean your own printer, and did not need to bother maintenance personnel on-site service, and also be able to save you a lot of time too!
Clean the card printerWhen do you usually clean your card machine?What brand of card is you using?Many card machines come with a cleaning system, but these parts are very easy to suck into the dust and residue,If you can not always clean your c...
View detailsThe long term use of e-cigarettes is not clean, which can cause blockage of the tubing, affect the smoke, and even cause damage. Regular cleaning can prolong the service life.Before cleaning, take a special electronic cigarettes Meditech cleaning ...
View detailsFirst use of blowing off the dust ball lens, very fine dust, due to the surface by the molecular surface of the lens can attract, was adsorbed by the state, is not easy to blow off, use a soft brush gently brush (brush usually should be stored in ...
View detailsEnter the arithmetic result.
Incorrect calculation, please re-enter.
Meditech
