Search productSearch post
In order to ensure good print quality printer about every print 1000 In order to ensure good print quality printer, approximately every 1000 cards printed card is necessary to use a clean clean. (Note: the card into the card slot into the bottom of the wheel should be kept clean to prevent contamination and the card into the card fails).
1. Open the front cover of the printer, remove the ribbon and transfer film frame.
2. Remove the slot and the slot.
3. Clean out the card from the cleaning kit, remove the double-sided adhesive tape.
4. Close the front cover of the printer, the printer cleaning card is inserted into the slot edges.
5. On your computer, click on the bottom left corner of the screen “Start” menu, select “Control Panel”, then select “Printers and Faxes”, and then choose the right HDP5000 printer icon on the “Printing Preferences”, click “OK” just above “ToolBox” button.
6. Select “Clean Printer” tab.
7. Click the “Clean” button. (Note: The printer will inhale clean card cleaning process is performed automatically cleaning process has been pre-designed to automatically and thoroughly clean the inside of the printer rollers and roller into the card.)
Clean production of professional manufacturers Cleaning cards, purifying swab production, the need for a very professional technology, but also to ensure a good product quality practice, to truly achieve the best product supply, production compani...
View detailsCamera Sensor Cleaning Swabs Camera and DSLR Sensor Cleaning Swabs with Polyester tip This Long handle Cleanroom Polyester Swab is an excellent general purpose swab for cleaning surfaces and hard-to-reach areas. Its laundered, knitted Alpha polyes...
View details
A cleanroom swab is a specialized tool designed for use in cleanroom environments to effectively clean and remove contaminants from critical surfaces. Cleanrooms are controlled environments with low levels of airborne particles, which are essentia...
View details1. With the deposit application or ScanLite launched, hold down the shift key and press the ‘Reset’ button (or unplug and plug back in the power supply). This will start the scanner’s cleaning / diagnostic mode program. 2. Select the ‘Clean’ tab a...
View detailsEnter the arithmetic result.
Incorrect calculation, please re-enter.
Meditech
